Clay Stabilizer
1) Introduction
This product is a series of cationic oligomers, polycondensates or copolymers, which can effectively avoid formation damage caused by clay swelling and migration, thereby increasing oil and gas production.
2) Technical parameters
3) What it replaces
Common clay stabilizers that are not effective in low concentration and other special formation.
4) Advantages
Environmentally friendly
Can be used in drilling and fracturing processes to provide continuous protection for the formation
Compatible with various additives for fracturing/drilling fluid products.
High temperature resistance and shear resistance.
Coiled Tubing Friction Reducer
1) Introduction
The scale of coiled tubing operations in horizontal wells is increasing, but due to the flexibility of coiled tubing itself, it is prone to bending and friction locking in the wellbore, resulting in the inability to run to a predetermined depth for subsequent operations. RF-1 type drag reducer can effectively reduce the frictional resistance between the tubing strings and increase the running depth of the coiled tubing.
2) Technical parameters
3) What it replaces
Compared with conventional drag reducers, it can reduce friction by 40%.
4) Advantages
Good temperature resistance
Excellent salt tolerance
Good anti-rust ability
5) Product Appearance
Proppant Surface Modifier
1) Introduction
The modifier can significantly reduce the broken rate and conductivity of quartz sand and has a certain consolidation ability, which effectively reduces sand production and formation damage.
2) Technical parameters
3) Product Appearance
Sand Solidification Agent
1) Introduction
The cross-linking effect of two materials, self-polymerization liquid and self-polymerization additive, is used to form a three-dimensional network structure to capture the sand particles, thereby achieving the self-agglomeration effect of the sand particles. It can increase the strength of the sand mass to more than 5MPa while maintaining the effective permeability at the μm² level.
2)Technical parameters
3) Product Appearance
